Ronan Engineering Model 950B Inventory Gauging Probe is designed for use with either the X76CTM （Continuous Tank Monitoring System）, the X76LVCS （Electronic Leak Detection System）, or the X76ETM-4X （Electronic Tank Monitor System） to continuously monitor changes in liquid level within above and below ground storage tanks. Applications include continuous inventory monitoring, continuous overfill prevention, and tank tightness testing.

950B智能型磁致伸缩液位计

The 950B Probe employs a patented reflection technique to provide a high level of reliability for tank gauging systems. Designed and built using second generation magnetostrictive technology, it exceedsfederally mandated leak detection rates for USTs.Supplied with product and water interface floats, the 950B is constructed of 316 stainless steel, anodized aluminum, urethane and Delrin to provide years of trouble-free service. The 950B transmits level and temperature data to the control panel for conversion into net and gross volume for display. A variety of alarm signals can be generated at the control panel to initiate control functions or annunciate alarms such as High and Low product levels, High Water level, etc. The 950B Probe is easily installed through an available 3 or 4 inch tank access bung.

950B智能型磁致伸缩液位计

Wetted Parts: 316 Stainless Steel, Urethane, Delrin, Kynar

• Input Voltage: 26 Vdc ?0%
• Probe Length: Up to 24 ft. rigid; contact factory for longer lengths
• Accuracy: 0.010" （inventory mode）; 0.001" （leak detection mode）
• Linearity: ?.01% of full scale or, ?.010" whichever is greater
• Repeatability: ?.001% of full scale or ?.00025" whichever is greater
• Temperature: Up to six temperature sensing devices; one in head, five along probe length.
• Probe Output: Digital over two wires
• Distance to Monitor: Up to 2500 ft. using twisted, shielded wire pair
• Environment: NEMA 4
• Pressure: Up to 500 psi （float dependent）