LS型螺旋输送机是GX型螺旋输送机的更新换代产品，其主要特点有结构新颖、性

能可靠、技术指标*，适用范围广泛，螺旋输送机主要用于输送粉状颗粒状和

小块状物料,如煤粉、炉灰、水泥、化肥、纯碱、砂糖、谷物等;螺旋输送机/螺

旋给料机结构新颖密封性能好,可在若干位置进行中间加载和多点加载,操作安全

,方便可靠.螺旋式输送机/螺旋给料机是在化工建材粮食等部门中广泛应用的一

种输送设备.LS螺旋输送机螺旋输送机不宜输磅易变质的、粘性大的、易结块的

物料，这些物料在输送时会粘结在螺旋上，并随之旋而不向前移动或者在吊轴承

处形成物料的积塞，而使LS型螺旋输送机不能正常工作。螺旋直径从200毫米到

500毫米，共有五种规格，长度从4米到70米，每隔0.5米一档，选型时符合标准

公称长度，特殊需要可在选配节中另行提出。http://www.btdongjie.com

LS type screw conveyor is the product of GX spiral conveyer update,

the main characteristics of novel structure, reliable performance,

advanced technical indicators, wide application range, screw conveyor

is mainly used for conveying powdery granular and small bulk

materials, such as coal, ash, cement, fertilizer, soda ash, granulated

sugar, grain; spiral conveyor / spiral the feeder has the advantages

of novel structure and good sealing performance, can be the middle

loading and multi point loading at several locations, safe operation,

convenient and reliable. The spiral conveyor / screw feeder is widely

used in chemical building materials, food and other departments in a

conveying device.LS screw conveyor screw conveyor is lose pounds

perishable, large viscosity, easy to agglomerate materials, these

materials in the transportation bond in the spiral, and then spin

without moving forward or formation plug material in suspension

bearing, while the LS type screw conveyor can not work normally. Screw

diameter from 200 mm to 500 mm, a total of five kinds of

specifications, the length from 4 meters to 70 meters, 0.5 meters

every gear, selection to meet the standard nominal length, special

needs in the matching section separay introduced.