通过卷膜扭矩控制作用将淡网拉紧，确保材料平铺在灌胶工作台面上；淡网装置在气胀轴上，通过淡网输送电机，控制淡网型号长度。

tightening the light mesh by film torque control action,to make sure the material is spread flat on the gluing table;the light mesh is installed on the expansion shaft, the length of the light mesh can be controlled through the light mesh conveying motor.

2、过滤材料待完全卷入后退入到胶带缠绕工位，然后将胶带自动缠绕到过滤膜产品上，最后再自动将胶带进行切割。

filter materials back into tape winding station until fully sucked,then the tape is winded to the filter film product automatically , and finally the tape is automatically cut.

3 、 xyz轴自动打胶，配备运动控制器，根据不同型号的产品编辑程序；

xyz axis can automatically glue，installed with action controller,the program can be edited according to different models.

4、采用plc控制系统，所有参数均可通过在触摸屏设定完成，易学易用。

adopting plc control system,all the parameters can be set on the touch screen,easy to learn and use.

型号:bx-jm330     type:bx-jm330

工作方式：半自动   working method:semi-automatic

适应型号：1812-3013    suitable type:1812-3013

产能：1812-50   600只/8h   production capacity:1812-50  600pcs/8h

涂胶方式：自动涂胶   gluing method:automatic gluing

收卷方式：自动收卷   rolling method:automatic rolling

缠胶带方式：自动缠胶带   tape wrapping method:automatic wrapping

设备功率：4kw    equipment power:4kw

设备尺寸：l2400mm*w1100mm*h1500mm  equipment dimension:：l2400mm*w1100mm*h1500mm